Singleflow SSDRDCV400-1EC

Roof Mounted Direct Drive Centrifugal Fan

Standard size 400 mm
Air volume flow rates up to 0.88 m³/s
Static pressures up to 858 Pa
Suitable for operating temperatures up to +60℃
Available in EC

Overview

Roof mounted Aluzinc single centrifugal fans with demand control. Designed to monitor and control one or more fan units simultaneously, with 6 pre-programmed fan applications. Supplied with a multifunction remote control panel with LCD display.

Downloads

Features and Benefits

Easy Installation

All models are designed for direct connection to standard diameter flexible or rigid circular ducting with long spigots. Spigot is on the underside of the unit and can be fitted directly to the main duct.

Easy Commissioning

Minimum and maximum ventilation rates as well as control settings can all be setup easily via the wall display provided. Settings can be loaded from one display copying settings between units quickly.

Space Saving

External roof mounting outside of the building is ideal where space is a premium. Bird guard fitted as standard to stop damage done by wildlife.

Efficient Performance

High efficiency low tonal noise backward curved centrifugal impellers are directly driven by an EC external rotor motor, provide low specific fan powers and stepless speed control without tonal noise generation.

Weather Resistance

Integral louvered air discharge provides protection against ingress from the elements and is self draining. No additional outlet duct fittings are required.

Controllability

Advanced control features from the Demand Control Ventilation or DCV, provide an effective, efficient control to meet variable occupancy. This optimises the indoor air quality and energy use of the ventilation system. Available control, humidity, temperature, presence, CO2 and constant pressure.

Warranty

Each SSDRDCV has a 12 month warranty.

Specification

Casing

The unit casing shall be manufactured from 1.2mm thick natural finish Aluzinc. The casing shall be designed so as to minimise vibration and shall incorporate a louvered air discharge guarded against bird ingress. Each casing provides an inlet spigotto suit standard circular ducting. Top access panels shall be provided for ease of servicing.

Motors

Units shall have an EC external rotor motor fitted as standard. The motor contains sealed for life bearings. Thermal Class of motors to THCL 130 or 155 dependent on size. All motors are suitable for use in ambient air conditions up to +60 ℃.

Impellers

High efficiency low tonal noise backward curved centrifugal impeller, dynamically balanced to ISO 14694 Grade G6.3 and directly driven by the motor to providea smooth airflow through the unit.

Control

Electrical connection shall be via an IP55 terminal box mounted on the side for easy customer connection. Control shall be provided for applications Temperature, Relative Humidity, 0-10V, Constant Pressure and CO₂ via separate sensor. Manual operation shall be provided by supplied LCD Display Unit. The unit shall incorporate pre-fitted in-duct temperature sensor for application Temperature without the requirement of a separate sensor. LCD Display shall allow adjustment of application parameters, operation of system automatically / manually and display of error messaging. Programmable time with four on / off functions per day shall be adjustable from the LCD Display Unit. Digital Input terminal connections shall be available for remote enable, fixed speed for boost speed or set back speed. Selection of Single, Twin and Master/ Slave fan arrangement shall be via LCD Display.

Quality Management

Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001. All Singleflow SSDRDCV units are to be tested to ISO 5801 (airside performance) and BS 848 Part 2 (sound performance).